[et_pb_section admin_label=”section”][et_pb_row admin_label=”row”][et_pb_column type=”4_4″][et_pb_text admin_label=”Text” background_layout=”light” text_orientation=”left” use_border_color=”off” border_color=”#ffffff” border_style=”solid”]

Our Machines utilize Renishaw probe solutions which can help reduce set‑up times by up to 90% and improve  process control (tool setting, broken tool detection, component set-up, in-cycle gauging and first-off component inspection, with automatic offset updates).

 

 

Haas VF2 SS (Super –Speed)  2016 with a new controller (4 axes ready)

VF-2SS[1]

Super-Speed Vertical Machining Center; 30″ x 16″ x 20″ (762 x 406 x 508 mm), 40 taper, 30 hp (22.4 kW) vector drive, 12,000 rpm, inline direct-drive, high-speed 24+1 side-mount tool changer, 1400 ipm (35.6 m/min) rapids, power-failure detection module, 1 GB program memory, 15″ color LCD monitor, USB port, memory lock keyswitch, rigid tapping and 55-gallon (208 liter) flood coolant system.

[/et_pb_text][et_pb_text admin_label=”Text” background_layout=”light” text_orientation=”left” use_border_color=”off” border_color=”#ffffff” border_style=”solid”]

Haas VF2 SS (Super –Speed)   2014 (4 axes ready)

VF-2SS[1]

Super-Speed Vertical Machining Center; 30″ x 16″ x 20″ (762 x 406 x 508 mm), 40 taper, 30 hp (22.4 kW) vector drive, 12,000 rpm, inline direct-drive, high-speed 24+1 side-mount tool changer, 1400 ipm (35.6 m/min) rapids, power-failure detection module, 1 GB program memory, 15″ color LCD monitor, USB port, memory lock keyswitch, rigid tapping and 55-gallon (208 liter) flood coolant system.

[/et_pb_text][et_pb_text admin_label=”Text” background_layout=”light” text_orientation=”left” use_border_color=”off” border_color=”#ffffff” border_style=”solid”]

VF-1[1]

[/et_pb_text][et_pb_text admin_label=”Text” background_layout=”light” text_orientation=”left” use_border_color=”off” border_color=”#ffffff” border_style=”solid”]

Haas VMC VF-1

The Haas VF-1 vertical machining center has 20″ x 16″ x 20″ (xyz), (508 x 406 x 508 mm) travels.

Like every Haas machine, the VF-1 represents years of on-going refinement. Customer feedback coupled with a relentless pursuit of perfection sees advancements and design enhancing changes incorporated directly into the production line every day.

The Haas VF-1 is a rugged, small-footprint VMC that yields reliability and accuracy in a small-framed machine. The VF-1 has a 40-taper cartridge spindle that’s powered by a 20 hp vector Dual-Drive (Y-Delta) motor driving through the Haas 2-speed geared head. The VF-1 will produce 250 ft-lb of torque at a low 450 rpm, but will also run up to 7,500 rpm in less than 5 seconds for finishing aluminum.

[/et_pb_text][et_pb_text admin_label=”Text” background_layout=”light” text_orientation=”left” use_border_color=”off” border_color=”#ffffff” border_style=”solid”]

Plus:

  • 2 PRESS DRILLS “ROCKWELL”              
  • 3 SAWS & BELT SANDERS              
  • MOORE HIGH PRECISION ROTARY TABLE .0001″
  • SINE PLATES, PRECISION SINE  BARS
  • PERMANENT MAGNETIC PLATES              
  • ADJUSTABLE ANGLE PLATES              
  • TAPPING HEADS              
  • COLLET HORIZONTALINDEXING FIXTURE  15 DEEGRE SCALE
  • ANGLE COLLET FIXTURE              
  • HEX & SQUARE COLLET BLOCK              

 

Haas been equipped with HA5C indexer and is fully 4 axis machining center. The Haas HA5C series is  the ideal choice for holding smaller parts. Clamp parts using standard 5C collets, or chuck them by threading a 3-jaw chuck to the 2 3/16″-10  spindle nose.

 

Hitachi-Seiki 3NE-300, 2-axes CNC Turning Center,

Maximum swing 17.7”

Maximum swing over cross slide 12”

Maximum work length 24”

Bar capacity 1-1/4”

Equipped with 6” 3-jaw chuck and       5C collets chuck

 

Dainichi BX-45, 2-axes CNC  Turning Center

Maximum swing 20”

Maximum swing over cross slide 18”

Maximum work length 24”

Bar capacity 3”

Equipped with 10” 3-jaw chuck and  5C collets chuck

 

[/et_pb_text][/et_pb_column][/et_pb_row][/et_pb_section]